LEDwholesalers 16.4ft RGB Color Changing Kit with LED Flexible Strip, Controller with 44-button Remote and Power Supply, 2034RGB+3315+3215

Price :
Models : 2034RGB+3315+3215
by : LEDwholesalers

LEDwholesalers 16.4ft RGB Color Changing Kit with LED Flexible Strip, Controller with 44-button Remote and Power Supply, 2034RGB+3315+3215 Features

• Complete kit includes Led strip, controller, and power supply
• Set static colors, adjust brightness, plump discrete auto color changing modes via wireless remote
• Led strip is cuttable and linkable (required components not included, combined distance should not exceed 16ft)
• Flexible - fits just about any space you can imagine
• Eco kindly - uses very dinky energy, without harmful radiations

LEDwholesalers 16.4ft RGB Color Changing Kit with LED Flexible Strip, Controller with 44-button Remote and Power Supply, 2034RGB+3315+3215 Overviews

Specifications
* Led Quantity/Type: 150xSmd5050 Rgb
* Input Voltage (to power supply): 100-240Vac, 50/60Hz
* Power: 36W
* Led Strip Width: 10mm
* Led Strip Length: 16.4ft (5m)

Items Included
* (1x) 16.4 feet Rgb Led strip with self adhesive tape on the back
* (1x) Controller and 44-button wireless Ir remote
* (1x) Power supply

Wiring
* Unroll Led strip completely.
* Any exposed wires on the other end of the Led strip must not touch one someone else (or any metal object), creating a short.
* join together the 4-pin connector of controller to that of the Led strip, making sure that the arrows line up.
* join together 5mm Dc jack of power contribute to controller.
* remove the plastic seal in the battery compartment of the wireless remote.
* double check that all connections are exact and secure, then plug in power cord.

Note
* While the included controller can handle the power requirement of two such strips, the power contribute only has the capacity to drive a particular strip.
* Do not lengthen the Led strip by directly connecting an supplementary section to it.
* prolongation kits are available for adding supplementary strips.
* Test all components before permanent installation.
* Make sure that wires at the other end of the Led strip are not touching one someone else (or any metal object), which would originate a short circuit. Electrical tape may be used to wrap each of those wire ends to detach them.
* The Led strip is cuttable every 3 Leds, approx. Every 4", at the designated cut marks.